Publications

Skip Navigation Links.
Recently Published
Expand per documenttypeper documenttype
Collapse per Unitper Unit
Expand per Clusterper Cluster

Search for publications:


Limit search to the fields

ECN publication
Title:
Reproducible Manufacturing of Dye-Sensitized Solar Cells on a Semi-automated Baseline
 
Author(s):
 
Published by: Publication date:
ECN Solar Energy 1-3-2003
 
ECN report number: Document type:
ECN-RX--03-010 Article (scientific)
 
Number of pages:
15  

Published in: Progress in Photovoltaics: Research and Applications (John Wiley & Sons Ltd.), , 2003, Vol.11, p.207-220.

Abstract:
A fully operational baseline consisting of dedicated equipment to processnanocrystal-line dye-sensitized solar cell devices has been installed at ECN. This baseline focuses on the production of glass/glass devices with dimensions up to 10x10 cm2. Present power conversion efficiencies of 6% obtained for cell areas of 2.5 cm2 are successfully translated to 100 cm2 devices with an active area of 68 cm2 by application of identical cell components. The power conversion efficiency with respect to total area was 4%. Processing of a large number of devices in the baseline shows good results in terms of process reliability and yield. The overall yield for a series of 27 devices (10x10 cm2)was 96%, while 84% (22 of the remaining 26 devices) generated a cell efficiency within 7% deviation from the average value (4.3%). The reproducibility of the tita-nium dioxide (TiO2 ) colloid synthesis has been investigated. The deviation from the average efficiency (4 9%) of three batches of colloid was at most 3 2%. These results prove that complete device manufacturing of nc-DSC by a baseline process, starting with colloid synthesis is reproducible for surfaces up to 10x10 cm2. Copyright 2003 John Wiley & Sons, Ltd.


Back to List