|
Title:
|
|
Characterization of MgSO4 hydrate for thermochemical seasonal heat storage
|
|
|
|
Author(s):
|
|
|
|
|
|
Published by:
|
Publication date:
|
|
ECN
Efficiency & Infrastructure
|
25-11-2009
|
|
|
|
ECN report number:
|
Document type:
|
|
ECN-W--09-038
|
Article (scientific)
|
|
|
|
Number of pages:
|
|
|
7
|
|
Published in: Journal of Solar Energy Engineering (ASME), , 2009, Vol.131, p.041014-1-041014-7.
Abstract:
Water vapor sorption in salt hydrates is one of the most promising means for compact, low loss, and long-term storage of solar heat in the built environment. One of the most interesting salt hydrates for compact seasonal heat storage is magnesium sulfate heptahydrate MgSO4·7H2O. This paper describes the characterization of MgSO4·7H2O to examine its suitability for application in a seasonal heat storage system for the built environment. Both charging (dehydration) and discharging (hydration) behaviors of the
material were studied using thermogravimetric differential scanning calorimetry, X-ray diffraction, particle distribution measurements, and scanning electron microscope. The experimental results show that MgSO4·7H2O can be dehydrated at temperatures below 150°C, which can be reached by a medium temperature (vacuum tube) collector. Additionally, the material was able to store 2.2 GJ/m3, almost nine times more energy than can be stored in water as sensible heat. On the other hand, the experimental results
indicate that the release of the stored heat is more difficult. The amount of water taken up and the energy released by the material turned out to be strongly dependent on the water vapor pressure, temperature, and the total system pressure. The results of this study indicate that the application of MgSO4·7H2O at atmospheric pressure is problematic for a heat storage system where heat is released above 40°C using a water vapor pressure of 1.3 kPa. However, first experiments performed in a closed system at low pressure
indicate that a small amount of heat can be released at 50°C and a water vapor pressure of 1.3 kPa. If a heat storage system has to operate at atmospheric pressure, then the application of MgSO4·7H2O for seasonal heat storage is possible for space heating operating at 25°C and a water vapor pressure of 2.1 kPa. DOI: 10.1115/1.4000275
Back to List